Difference between revisions of "GPCE 2009"

From Openresearch
Jump to: navigation, search
(gkahYKYhmBjSOFhu)
(rollback)
Line 1: Line 1:
−
PattiI don't know if I felt that way about prose or papers  I think ivnhag very particular teachers and professors made me realize that if I wanted good grades, editing was required. However, I definitely did the same thing as you with poetry, Brigitte. If I wrote it one way, that's they way it was meant to come out and it wasn't getting changed. I guess I wrestle with the idea that poetry comes from my soul, whereas the rest of my writing comes very much from my mind (and to some extent, my heart). I like the diamond analogy, but with poetry, it doesn't feel honest enough if I polish it. Everything else, though, can always benefit from some cut and polish.It's been a long time since I really wrote any poetry  oddly enough, that muse  seems to have taken an infinitely long sabbatical  but I wonder if I'd feel differently about it now. I re-read some of my poetry and still like it, but there are certainly pieces that could easily have been better. I think I justify not editing the poetry because I write that primarily for me and the rest, well, most of the time it's written with the idea that someone else will see it someday. Not that it's a good excuse.
+
{{Event
 +
|Acronym=GPCE 2009
 +
|Title=8th International Conference on Generative Programming and Component Engineering
 +
|Series=GPCE
 +
|Type=Conference
 +
|Field=Software engineering
 +
|Start date=2009/10/04
 +
|End date=2009/10/05
 +
|Homepage=www.gpce.org
 +
|City=Denver
 +
|State=Colorado
 +
|Country=USA
 +
|Submission deadline=2009/05/18
 +
|Abstract deadline=2009/05/11
 +
|Paper deadline=2009/05/18
 +
|Workshop deadline=2009/03/15
 +
|Tutorial deadline=2009/04/19
 +
|Notification=2009/06/30
 +
}}
 +
<pre>
 +
 
 +
  Call for Papers
 +
 
 +
Eighth International Conference on
 +
    Generative Programming and Component Engineering (GPCE 2009)
 +
 
 +
October 4-5, 2009
 +
  Denver, Colorado
 +
    (co-located with MODELS 2009 and SLE 2009)
 +
 
 +
http://www.gpce.org
 +
 
 +
 
 +
Important Dates
 +
---------------
 +
 
 +
* Submission of abstracts: May 11, 2009
 +
* Submission: May 18, 2009
 +
* Notification: June 30, 2009
 +
 
 +
Workshops and tutorials (submission via MODELS 2009)
 +
* Workshop Proposals: March 15, 2009
 +
* Tutorial Proposals: April 19, 2009
 +
 
 +
 
 +
Scope
 +
-----
 +
 
 +
Generative and component approaches are revolutionizing software
 +
development similar to how automation and components revolutionized
 +
manufacturing. Generative Programming (developing programs that
 +
synthesize other programs), Component Engineering (raising the level
 +
of modularization and analysis in application design), and
 +
Domain-Specific Languages (DSLs) (elevating program specifications to
 +
compact domain-specific notations that are easier to write, maintain,
 +
and analyze) are key technologies for automating program development.
 +
 
 +
The International Conference on Generative Programming and Component
 +
Engineering provides a venue for researchers and practitioners
 +
interested in techniques for enhancing the productivity, quality, and
 +
time-to-market in software development that stems from deploying
 +
components and automating program generation. In addition to exploring
 +
cutting-edge techniques for developing generative and component-based
 +
software, our goal is to foster further cross-fertilization between
 +
the software engineering research community and the programming
 +
languages community.
 +
 
 +
 
 +
Submissions
 +
-----------
 +
 
 +
Research papers:
 +
 
 +
10 pages in SIGPLAN proceedings style (sigplanconf.cls) reporting
 +
original research results that contribute to scientific knowledge in
 +
the areas listed below (the PC chair can advise on appropriateness).
 +
 
 +
Tool demonstrations:
 +
 
 +
Tool demonstrations should present available tools that implement novel
 +
generative and component-based software engineering techniques. Any of the
 +
GPCE'09 topics of interest are appropriate areas for research demonstrations
 +
but purely commercial tool demonstrations will not be accepted. Submissions
 +
should contain a tool description of 4 pages in SIGPLAN proceedings style
 +
(sigplanconf.cls) that will be published in the proceedings, and a
 +
demonstration outline of up to 2 pages text plus 2 pages screen shots that  
 +
will be used by the PC to evaluate the submission.
 +
 
 +
Tutorials and Workshops:
 +
 
 +
Tutorials and workshops of interest to the GPCE audience can be
 +
submitted to MODELS 2009. Please contact the corresponding MODELS
 +
chairs for submission details. Accepted MODELS tutorials and workshops
 +
that are primarily aimed at the GPCE audience will preferably be
 +
scheduled for Tuesday, October 6, 2009.
 +
 
 +
MODELS 2009 Tutorial Chair:
 +
* Thomas Weigert (Missouri University of Science and Technology, USA)
 +
 
 +
MODELS 2009 Workshop Chair:
 +
* James Bieman (Colorado State University, USA)
 +
 
 +
 
 +
Topics
 +
------
 +
 
 +
GPCE seeks contributions in software engineering and in programming
 +
languages related (but not limited) to:
 +
 
 +
* Generative programming
 +
  o Reuse, meta-programming, partial evaluation, multi-stage and
 +
    multi-level languages, step-wise refinement, generic programming
 +
  o Semantics, type systems, symbolic computation, linking and
 +
    explicit substitution, in-lining and macros, templates,
 +
    program transformation
 +
  o Runtime code generation, compilation, active libraries,
 +
    synthesis from specifications, development methods,
 +
    generation of non-code artifacts, formal methods, reflection
 +
* Generative techniques for
 +
  o Product-line architectures
 +
  o Distributed, real-time and embedded systems
 +
  o Model-driven development and architecture
 +
  o Resource bounded/safety critical systems.
 +
* Component-based software engineering
 +
  o Reuse, distributed platforms and middleware, distributed
 +
    systems, evolution, patterns, development methods,
 +
    deployment and configuration techniques, formal methods
 +
* Integration of generative and component-based approaches
 +
* Domain engineering and domain analysis
 +
  o Domain-specific languages including visual and UML-based DSLs
 +
* Separation of concerns
 +
  o Aspect-oriented and feature-oriented programming,
 +
  o Intentional programming and multi-dimensional separation of
 +
    concerns
 +
* Industrial applications of the above
 +
 
 +
Submissions must adhere to SIGPLAN's republication policy. Please
 +
contact the program chair if you have any questions about how this
 +
policy applies to your paper (chair09@gpce.org).
 +
 
 +
 
 +
Organization
 +
------------
 +
 
 +
General Chair:  Jeremy Siek (University of Colorado at Boulder, USA)
 +
Program Chair:  Bernd Fischer (University of Southampton, UK)
 +
Publicity Chair: Giorgios Economopoulos (University of Southampton, UK)
 +
 
 +
Program Committee:
 +
* Sven Apel (University of Passau, Germany)
 +
* Ira D. Baxter (Semantic Designs, USA)
 +
* Martin Bravenboer (University of Massachusetts Amherst, USA)
 +
* Tomas Bures (Charles University in Prague, Czech Republic)
 +
* Charles Consel (INRIA / LaBRI, France)
 +
* Ivica Crnkovic (Malardalen University, Sweden)
 +
* Krzysztof Czarnecki (University of Waterloo, Canada)
 +
* Ewen Denney (RIACS / NASA Ames, USA)
 +
* Martin Erwig (Oregon State University, USA)
 +
* Ronald Garcia (Rice University, USA)
 +
* Kevin Hammond (University of St Andrews, UK)
 +
* Magne Haveraaen (University of Bergen, Norway)
 +
* Shan Shan Huang (Georgia Institute of Technology, USA)
 +
* Jaakko Jarvi (Texas A&M University, USA)
 +
* Sam Kamin (University of Illinois, USA)
 +
* Kung-Kiu Lau (University of Manchester, UK)
 +
* Julia Lawall (University of Copenhagen, Denmark)
 +
* Christian Lengauer (University of Passau, Germany)
 +
* Andrew Lumsdaine (Indiana University, USA)
 +
* Klaus Ostermann (University of Aarhus, Denmark)
 +
* Zoltan Porkolab (Eotvos Lorand University, Hungary)
 +
* Bran V. Selic (Malina Software, Canada)
 +
* Doug Smith (Kestrel Institute, USA)
 +
* Tetsuo Tamai (University of Tokyo, Japan)
 +
* Juha-Pekka Tolvanen (MetaCase, Finland)
 +
* Eelco Visser (Delft University of Technology, The Netherlands)
 +
* Markus Voelter (itemis AG, Germany)
 +
* Eric Van Wyk (University of Minnesota, USA)
 +
* Steffen Zschaler (Lancaster University, UK)
 +
</pre>

Revision as of 09:32, 5 March 2012

GPCE 2009
8th International Conference on Generative Programming and Component Engineering
Event in series GPCE
Dates 2009/10/04 (iCal) - 2009/10/05
Homepage: www.gpce.org
Location
Location: Denver, Colorado, USA
Loading map...

Important dates
Workshops: 2009/03/15
Tutorials: 2009/04/19
Abstracts: 2009/05/11
Papers: 2009/05/18
Submissions: 2009/05/18
Notification: 2009/06/30
Table of Contents 



			  Call for Papers

		 Eighth International Conference on
    Generative Programming and Component Engineering (GPCE 2009)

			 October 4-5, 2009
			  Denver, Colorado
	     (co-located with MODELS 2009 and SLE 2009)

			http://www.gpce.org


Important Dates
---------------

* Submission of abstracts: May 11, 2009
* Submission: May 18, 2009
* Notification: June 30, 2009

Workshops and tutorials (submission via MODELS 2009)
* Workshop Proposals: March 15, 2009
* Tutorial Proposals: April 19, 2009 


Scope
-----

Generative and component approaches are revolutionizing software
development similar to how automation and components revolutionized
manufacturing. Generative Programming (developing programs that
synthesize other programs), Component Engineering (raising the level
of modularization and analysis in application design), and
Domain-Specific Languages (DSLs) (elevating program specifications to
compact domain-specific notations that are easier to write, maintain,
and analyze) are key technologies for automating program development.

The International Conference on Generative Programming and Component
Engineering provides a venue for researchers and practitioners
interested in techniques for enhancing the productivity, quality, and
time-to-market in software development that stems from deploying
components and automating program generation. In addition to exploring
cutting-edge techniques for developing generative and component-based
software, our goal is to foster further cross-fertilization between
the software engineering research community and the programming
languages community.


Submissions
-----------

Research papers:

10 pages in SIGPLAN proceedings style (sigplanconf.cls) reporting
original research results that contribute to scientific knowledge in
the areas listed below (the PC chair can advise on appropriateness).

Tool demonstrations:

Tool demonstrations should present available tools that implement novel 
generative and component-based software engineering techniques. Any of the 
GPCE'09 topics of interest are appropriate areas for research demonstrations 
but purely commercial tool demonstrations will not be accepted. Submissions 
should contain a tool description of 4 pages in SIGPLAN proceedings style 
(sigplanconf.cls) that will be published in the proceedings, and a 
demonstration outline of up to 2 pages text plus 2 pages screen shots that 
will be used by the PC to evaluate the submission. 

Tutorials and Workshops:

Tutorials and workshops of interest to the GPCE audience can be
submitted to MODELS 2009. Please contact the corresponding MODELS
chairs for submission details. Accepted MODELS tutorials and workshops
that are primarily aimed at the GPCE audience will preferably be
scheduled for Tuesday, October 6, 2009.

MODELS 2009 Tutorial Chair:
* Thomas Weigert (Missouri University of Science and Technology, USA) 

MODELS 2009 Workshop Chair:
* James Bieman (Colorado State University, USA) 


Topics
------

GPCE seeks contributions in software engineering and in programming
languages related (but not limited) to:

* Generative programming
  o Reuse, meta-programming, partial evaluation, multi-stage and
    multi-level languages, step-wise refinement, generic programming
  o Semantics, type systems, symbolic computation, linking and
    explicit substitution, in-lining and macros, templates,
    program transformation
  o Runtime code generation, compilation, active libraries,
    synthesis from specifications, development methods,
    generation of non-code artifacts, formal methods, reflection
* Generative techniques for
  o Product-line architectures
  o Distributed, real-time and embedded systems
  o Model-driven development and architecture
  o Resource bounded/safety critical systems.
* Component-based software engineering
  o Reuse, distributed platforms and middleware, distributed
    systems, evolution, patterns, development methods,
    deployment and configuration techniques, formal methods
* Integration of generative and component-based approaches
* Domain engineering and domain analysis
  o Domain-specific languages including visual and UML-based DSLs
* Separation of concerns
  o Aspect-oriented and feature-oriented programming,
  o Intentional programming and multi-dimensional separation of
    concerns
* Industrial applications of the above

Submissions must adhere to SIGPLAN's republication policy. Please
contact the program chair if you have any questions about how this
policy applies to your paper (chair09@gpce.org).


Organization
------------

General Chair:   Jeremy Siek (University of Colorado at Boulder, USA) 
Program Chair:   Bernd Fischer (University of Southampton, UK) 
Publicity Chair: Giorgios Economopoulos (University of Southampton, UK)

Program Committee:
* Sven Apel (University of Passau, Germany)
* Ira D. Baxter (Semantic Designs, USA)
* Martin Bravenboer (University of Massachusetts Amherst, USA)
* Tomas Bures (Charles University in Prague, Czech Republic)
* Charles Consel (INRIA / LaBRI, France)
* Ivica Crnkovic (Malardalen University, Sweden)
* Krzysztof Czarnecki (University of Waterloo, Canada)
* Ewen Denney (RIACS / NASA Ames, USA)
* Martin Erwig (Oregon State University, USA)
* Ronald Garcia (Rice University, USA)
* Kevin Hammond (University of St Andrews, UK)
* Magne Haveraaen (University of Bergen, Norway)
* Shan Shan Huang (Georgia Institute of Technology, USA)
* Jaakko Jarvi (Texas A&M University, USA)
* Sam Kamin (University of Illinois, USA)
* Kung-Kiu Lau (University of Manchester, UK)
* Julia Lawall (University of Copenhagen, Denmark)
* Christian Lengauer (University of Passau, Germany)
* Andrew Lumsdaine (Indiana University, USA)
* Klaus Ostermann (University of Aarhus, Denmark)
* Zoltan Porkolab (Eotvos Lorand University, Hungary)
* Bran V. Selic (Malina Software, Canada)
* Doug Smith (Kestrel Institute, USA)
* Tetsuo Tamai (University of Tokyo, Japan)
* Juha-Pekka Tolvanen (MetaCase, Finland)
* Eelco Visser (Delft University of Technology, The Netherlands)
* Markus Voelter (itemis AG, Germany)
* Eric Van Wyk (University of Minnesota, USA)
* Steffen Zschaler (Lancaster University, UK)
Retrieved from "https://www.openresearch.org/mediawiki/index.php?title=GPCE_2009&oldid=24489"
Facts about "GPCE 2009"
RDF feed
Abstract deadlineMay 11, 2009 +
AcronymGPCE 2009 +
End dateOctober 5, 2009 +
Event in seriesGPCE +
Event typeConference +
Has coordinates39° 44' 21", -104° 59' 6"Latitude: 39.739236111111
Longitude: -104.98486111111 +
Has location cityDenver +
Has location countryCategory:USA +
Has location stateColorado +
Homepagehttp://www.gpce.org +
IsAEvent +
NotificationJune 30, 2009 +
Paper deadlineMay 18, 2009 +
Start dateOctober 4, 2009 +
Submission deadlineMay 18, 2009 +
Title8th International Conference on Generative Programming and Component Engineering +
Tutorial deadlineApril 19, 2009 +
Workshop deadlineMarch 15, 2009 +