M3 2011

From Openresearch
Revision as of 09:39, 24 June 2011 by 220.255.1.72 (talk) (New page: {{Event |Acronym=M3 2011 |Title=Annual International Conference on Materials Science, Metal and Manufacturing |Type=Conference |Start date=2011/12/12 |End date=2011/12/13 |Homepage=www.m3-...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
M3 2011
Annual International Conference on Materials Science, Metal and Manufacturing
Dates 2011/12/12 (iCal) - 2011/12/13
Homepage: www.m3-conference.org/
Location:
Table of Contents


The following coordinate was not recognized: Geocoding failed.
The following coordinate was not recognized: Geocoding failed.


Annual International Conference on Materials Science, Metal and Manufacturing (M3 2011) http://www.m3-conference.org/

Date: 12-13 November 2011 Venue: Hotel Fort Canning, Singapore

[KEY TOPICS INCLUDE BUT ARE NOT LIMITED TO:]

Advances in Biomanufacturing • Advances in Materials Forming • Advances in Micro/Meso Mechanical Manufacturing • Advances in Modeling, Analysis, and Simulation of Manufacturing Processes • Advances in Nontraditional Manufacturing • Advances in Pervasive Sensing and Computing for Manufacturing Systems • Advances of Abrasive Machining in Semiconductor Industry • Automatic Production Line • Case Hardening • Casting and Solification • Challenges in Adaptive Manufacturing Planning and Control • Coatings and Surface Engineering • Composite Materials • Concentration of the Ore • Crystallography • Cutting and Grinding • Data Driven Manufacturing • Design and Manufacturing of Composite Components • Design and Manufacturing of MEMS components • Design for Sustainability • Dynamic Design • Electrometallurgy • Environmentally Sustainable Manufacturing Processes and Systems • Extractive metallurgy • Fabrication Process of Nanomaterials and Nanodevices • Green Energy System Manufacturing • Green Manufacturing • Heat Treatment • High-Energy Beam Processing • High-Speed Machining • Hydrometallurgy • Important Common Alloy Sytems • Innovative Design Methodology • Intelligent Maintenance Systems for Machines and Equipments • Laser Based Manufacturing • Logistics and Supply Chain Management • Manufacturing and Metrology Sytems • Manufacturing Quality Control Systems • Manufacturing Service • Manufacturing System Maintenance • Manufacturing with Soft Materials • Materials Behavior • Materials Forming • MEMS Integration • MEMS packaging • Metal Forming and Joining • Metal Working Processes • Metallography • Modeling, Analysis, and Simulation of Manufacturing processes • Multi-Physics Coupling Simulation and Optimization • Nanomaterials and Nanomanufacturing • Non-conventional Machining • Numerical Control Technology • Other Machining Methods • Other Materials Processing • Other Modern Design Methodologies • Powder Metallurgy and Ceramic Forming • Production Engineering of Metals • Pyrometallurgy • Reliability Design • Separation of the Metal • Smart Machining • Surface Integrity and Performance of Components by Multiscale Manufacturing • Surface Science and Technology • Surface Treatment • Surface, Subsurface, and Interface Phenomena • Sustainable Manufacturing of Advanced Composites • Sustainable Nanomanufacturing • Testing and Control of MEMS • Thermal Spray • Thermally-Enhanced Processes and Materials • Ultra-Precision Machining • Virtual Manufacturing and Concurrent Engineering • Web-based Manufacturing


[GENERAL CHAIR]

Prof. the Hon. Dr. Stephen Martin Member, Board of Governors, Global Science & Technology Forum (GSTF) Former Speaker Parliament of Australia Former Deputy Vice Chancellor (Strategy and Planning) Curtin University of Technology Former Pro Vice Chancellor International, Victoria University

[PROGRAM COMMITTEE]

Prof. Richard Clegg University of Australia

Prof. Goutam Pohit Jadavpur University

Prof. Ramanath Rensselaer Polytechnic Institute

Prof. Abhijit Chanda Jadavpur University

Prof. Prasad K.D.V. Yarlagadda Queensland University of Technology


A/Prof. Jaroslaw Drelich Michigan Technological University

Dr. Abdul Md Mazid Central Queensland University

[CONTACT INFORMATION]

Email: info@rtembeddedsystems.org Website: http://rtembeddedsystems.org DID: +65 6327 0165/66 Fax: +65 6327 0162

Facts about "M3 2011"
AcronymM3 2011 +
End dateDecember 13, 2011 +
Event typeConference +
Homepagehttp://www.m3-conference.org/ +
IsAEvent +
Start dateDecember 12, 2011 +
TitleAnnual International Conference on Materials Science, Metal and Manufacturing +