View source for M3 2011

{{Event
|Acronym=M3 2011
|Title=Annual International Conference on Materials Science, Metal and Manufacturing
|Type=Conference
|Start date=2011/12/12
|End date=2011/12/13
|Homepage=www.m3-conference.org/
}}
Annual International Conference on Materials Science, Metal and Manufacturing (M3 2011)
http://www.m3-conference.org/

Date: 12-13 November 2011
Venue: Hotel Fort Canning, Singapore

[KEY TOPICS INCLUDE BUT ARE NOT LIMITED TO:]

Advances in Biomanufacturing
• Advances in Materials Forming
• Advances in Micro/Meso Mechanical Manufacturing 
• Advances in Modeling, Analysis, and Simulation of Manufacturing Processes
• Advances in Nontraditional Manufacturing
• Advances in Pervasive Sensing and Computing for Manufacturing Systems
• Advances of Abrasive Machining in Semiconductor Industry
• Automatic Production Line
• Case Hardening
• Casting and Solification
• Challenges in Adaptive Manufacturing Planning and Control
• Coatings and Surface Engineering
• Composite Materials
• Concentration of the Ore
• Crystallography
• Cutting and Grinding
• Data Driven Manufacturing
• Design and Manufacturing of Composite Components
• Design and Manufacturing of MEMS components
• Design for Sustainability
• Dynamic Design
• Electrometallurgy
• Environmentally Sustainable Manufacturing Processes and Systems
• Extractive metallurgy
• Fabrication Process of Nanomaterials and Nanodevices
• Green Energy System Manufacturing
• Green Manufacturing
• Heat Treatment
• High-Energy Beam Processing
• High-Speed Machining
• Hydrometallurgy
• Important Common Alloy Sytems
• Innovative Design Methodology
• Intelligent Maintenance Systems for Machines and Equipments
• Laser Based Manufacturing
• Logistics and Supply Chain Management
• Manufacturing and Metrology Sytems
• Manufacturing Quality Control Systems
• Manufacturing Service
• Manufacturing System Maintenance
• Manufacturing with Soft Materials
• Materials Behavior
• Materials Forming
• MEMS Integration
• MEMS packaging
• Metal Forming and Joining
• Metal Working Processes
• Metallography
• Modeling, Analysis, and Simulation of Manufacturing processes
• Multi-Physics Coupling Simulation and Optimization
• Nanomaterials and Nanomanufacturing
• Non-conventional Machining
• Numerical Control Technology
• Other Machining Methods
• Other Materials Processing
• Other Modern Design Methodologies
• Powder Metallurgy and Ceramic Forming
• Production Engineering of Metals
• Pyrometallurgy
• Reliability Design
• Separation of the Metal
• Smart Machining
• Surface Integrity and Performance of Components by Multiscale Manufacturing
• Surface Science and Technology
• Surface Treatment
• Surface, Subsurface, and Interface Phenomena
• Sustainable Manufacturing of Advanced Composites
• Sustainable Nanomanufacturing
• Testing and Control of MEMS
• Thermal Spray
• Thermally-Enhanced Processes and Materials
• Ultra-Precision Machining
• Virtual Manufacturing and Concurrent Engineering
• Web-based Manufacturing


[GENERAL CHAIR]

Prof. the Hon. Dr. Stephen Martin 
Member, Board of Governors, Global Science & Technology Forum (GSTF)
Former Speaker Parliament of Australia
Former Deputy Vice Chancellor (Strategy and Planning) Curtin University of Technology
Former Pro Vice Chancellor International, Victoria University

[PROGRAM COMMITTEE]
 	 
Prof. Richard Clegg	 
University of Australia
 	 
Prof. Goutam Pohit	 
Jadavpur University
 	 
Prof. Ramanath	 
Rensselaer Polytechnic Institute
 	 
Prof. Abhijit Chanda	 
Jadavpur University
 	 
Prof. Prasad K.D.V. Yarlagadda	 
Queensland University of Technology
 
 	 
A/Prof. Jaroslaw Drelich	 
Michigan Technological University
 	 
Dr. Abdul Md Mazid	
Central Queensland University

[CONTACT INFORMATION]

Email: info@rtembeddedsystems.org
Website: http://rtembeddedsystems.org
DID: +65 6327 0165/66
Fax: +65 6327 0162
Acronym	M3 2011 +
End date	December 13, 2011 +
Event type	Conference +
Homepage	http://www.m3-conference.org/ +
IsA	Event +
Start date	December 12, 2011 +
Title	Annual International Conference on Materials Science, Metal and Manufacturing +